Software tutorial/Vectors and arrays

In this section we will focus on containers for your numbers: vectors and arrays. For the purposes of this section you should use this terminology:

Vector

A one-dimensional list of numbers

Array

A multi-dimensional arrangement of numbers

Matrix

A two-dimensional array

In this course we will mainly use vectors and matrices, however, arrays are extremely prevalent in process modelling.

Creating vectors

We will create these vectors:

• \(a = [4.0, \, 5, \,6, \,-2,\, 3, \text{NaN}, \infty]\)
• \(b = [0, 0, \ldots, 0]\) with 300 columns of zeros, one row
• \(c = [1, 1, \ldots, 1]^T\) with 300 rows of ones in a single column
• \(d = [2.6, 2.6, \ldots, 2.6]^T\) with 300 entries of 2.6 in one column
• \(e = [4.5, 4.6, 4.7, \ldots, 10.5 \), equi-spaced entries
• \(f = \) 26 equi-spaced entries starting from 3.0, going down -4.0

MATLAB

Python

a = [4, 5, 6, -2, 3, NaN, inf]; b = zeros(1, 300); c = ones(300, 1); d = ones(300, 1) .* 2.6; e = 4.5:0.1:10.5; f = linspace(3.0, -4.0, 26); >> size(a) ans = 1 7 >> size(c) ans = 300 1 >> size(f) ans = 1 26 In MATLAB, everything is an array, even a scalar is just a \(1 \times 1\) array, and vectors are either a \(1 \times n\) or \(n \times 1\) array.

import numpy as np a = np.array([4, 5, 6, -2, 3, np.nan, np.inf]) b = np.zeros((1, 300)) # note the extra brackets! c = np.ones((300, 1)) d = np.ones((300, 1)) * 2.6 e = np.arange(4.5, 10.5001, 0.1); # type help(np.arange) to understand why f = np.linspace(3.0, -4.0, 26) >>> a.shape (7,) >>> c.shape (300, 1) >>> f.shape (26,) The NumPy library in Python supports two different data containers: arrays and matrices. We will not use NumPy matrices in this course, because they cannot deal with multiple dimensions (e.g. 3 dimensional arrays). And even though we will probably not use multi-dimensional arrays in this course, it is not worth learning about NumPy matrices, because they are fairly limited. So we will focus on NumPy arrays, which while a bit harder to get used to, are much more powerful than NumPy matrices. A NumPy array is roughly equivalent to a MATLAB array. One difference though with MATLAB, is that a Numpy array with one dimension, in other words a vector, has a shape property of (n,): indicating the vector has n-elements. It is not like MATLAB where one of the dimensions is a 1 (one). If you require the vector to be either a row vector or a column vector, then you must do so explicitly. The following code demonstrates this: np.zeros(300).shape # (300,) a general vector np.zeros((300, 1)).shape # (300, 1) a column vector np.zeros((1, 300)).shape # (1, 300) a row vector

Creating arrays

We will create these arrays:

• \(a = \left(\begin{array}{cccc} 1 & 1 & 1 & 2 \\ 4 & -1 & -2 & 3 \\ \end{array} \right)\)

• \(b = \left(\begin{array}{cccc} 0 & 0 & \dots & 0 \\ \vdots & & & \vdots \\ 0 & 0 & \dots & 0 \\\end{array} \right)\), a \( 5 \times 8\) array of zeros

• \(c = \left(\begin{array}{cccc} 1 & 2 & \dots & 10 \\ 11 & 12 & \ldots & 20 \\ \vdots & \vdots & & \vdots \\ 61 & 62 & \dots & 70 \\\end{array} \right)\), a \( 7 \times 10\) array of sequence integers

MATLAB

Python

a = [1, 1, 1, 2; 4, -1, -2, 3]; b = zeros(5,8); c = reshape(1:70, 10, 7)' The last line requires a bit more explanation. It first creates a vector with 70 integers, starting from 1 and ending at 70. Then it reshapes that vector into a matrix, with 10 rows and 7 columns. Then it transposes the array into the desired \(7 \times 10\) result. What would have been the result if you wrote: reshape(1:70, 7, 10): can you explain why? See more on manipulating vectors and arrays below.

a = np.array([[1, 1, 1, 2], [4, -1, -2, 3]]) b = np.zeros((5, 8)) c = np.reshape(np.arange(1,71), (7, 10)) In Python, when you write something like [5, 2, 7, 2] you are creating a list; in this case a list of numbers. If you write [[1, 1, 1, 2], [4, -1, -2, 3]], then that is a list of lists. An array is nothing more than a list of lists, where the inner list a vector. So a list of lists is a 2D array, i.e. a matrix, while a list of lists of lists is a 3-dimensional array. You would not normally write these by hand, but the reason for the seemingly complex notation is that arrays are usually created from Excel files, or other data sources. When these are loaded into Python they are presented as a list of lists. So it is easy to create NumPy arrays from these data sources: something like np.array(data_from_excel_file).

Manipulating vectors and arrays

This section will be expanded soon to cover:

• addition, subtraction, and multiplication
• matrix transposes and inverses
• joining vectors and arrays together

MATLAB	Python
Coming soon	Coming soon