Difference between revisions of "Course evaluation 2010"

From Process Model Formulation and Solution: 3E4
Jump to navigation Jump to search
m
Line 20: Line 20:
This was the part of the evaluation I was most interested in.  Below is a bullet point list of comments, with the most frequent comments at the top
This was the part of the evaluation I was most interested in.  Below is a bullet point list of comments, with the most frequent comments at the top


* Be available for help (e.g. in the lab)
; Be available for help (e.g. in the lab)
** As stated, I don't have an office on campus; please come see me 30 minutes before and after the class (i.e. I am available 3 hours per week as my office hours).  The TA's available in the labs, or anytime outside the lab, by phoning/emailing them.  The 2 TA's have taken graduate-level courses in numerical methods and are totally qualified to help you out.
: As stated, I don't have an office on campus; please come see me 30 minutes before and after the class (i.e. I am available 3 hours per week as my office hours).  The TA's available in the labs, or anytime outside the lab, by phoning/emailing them.  The 2 TA's have taken graduate-level courses in numerical methods and are totally qualified to help you out.
* Give more software tutorials; teach the basics of programming; more explanation about MATLAB and Python; more coding examples


; Give more software tutorials; teach the basics of programming; more explanation about MATLAB and Python; more coding examples


; More TAs at the tutorials
: Both TAs are available at the tutorials; there was one occasion where a TA was away at a conference, but both are always available outside of class. Just call them at x22008, or make an appointment by email.
; More warning about assignments
: All assignment, tutorial, midterm and exam dates are now posted on the course calendar.  Thanks for bringing this to my attention.
; Ensure final exam can be completed in 3 hours; more time for tests and exams
: This was the purpose of asking how much extra time was required for the midterm; I will use this as a guide when setting the final exam.
; Less assumed prior (engineering) knowledge in the questions
; The classroom and time slot: the class is hot, the blackboard is not visible from the back; the projector is too small; the late schedule (17:30 to 18:20)
: I agree - but there is nothing I can do to change the allocated venue and hours. Please address these concerns directly to the university (i.e. someone in Chemical Engineering)
; Class members are noisy - making it difficult to hear
: I'll be as diplomatic as I can: this annoys me as well, and I do my best to make the lecture engaging.  If people talk during class, please ask them to be quiet, as I don't have time to break the lecture pace for this issue.
; Lecture pace is too fast
: There were a variety of evaluations: some said the pace was too fast, most said it was OK, some said too slow.  I know we cover a lot of material in this class, but if I go any slower we will not complete the required material for this course.  So far we are right on target with completing material in December.
; Have a review session before exam
: That is planned: it will be on 6 December 2010.
; Assignments on bottom-left of web page are easy to miss
: Please scroll down the page to see all tutorials, assignments and midterms.
; No coding for take-home midterm
: I'm sorry - that is the purpose of the take-home midterm; there will be no code interpretation/writing in the final exam though: that will be hand-calculations and interpretation.
; More bonus questions
: There have been several bonus questions in the tutorials and assignments; there will also be bonus grades in the take-home midterm, and perhaps in the final (I haven't set it yet).
; Too many slides (pages) / details on slides
: The slides are definitely comprehensive.  The vast majority of the class only had good things to say about the slides.  You are aware that you can print the slides out using a 2x3 layout, fitting up to 6 slides per page?
; 2 weeks for assignments and tutorials; fewer assignments and tutorials; no overlapping tutorials and assignments
: A 2 week turn around would be too long for this course; the material in this course is cumulative.  If you've noticed we learned about polynomial interpolation, and then used it right away for numerical differentiation a week later.  If we take 2 weeks to hand in an assignment you won't be able to really learn the material in time for the next sections of this course.
: You have to be practicing this material all the time in assignments and tutorials.  People learn by doing - very little learning actually takes place when I teach - because you are just listening. That is why tutorials and assignments are so frequent.  I do this in all my courses and I will keep doing this.


Less assumed prior knowledge
More in depth examples and descriptions
More in depth examples and descriptions
More examples to each concept
More examples to each concept
Examples related to assignments
Examples related to assignments
2 weeks for assignments
More example on board
More example on board
Shorter tutorials
Test or exam level questions in class
Test or exam level questions in class
More warning about assignments
Earlier time slot for lecture
Better class for lecture
More TAs at the tutorials
More time for tests and exams
Make assignments less difficult
Make assignments less difficult
Assignments on bottom-left of web page are easy to miss
Class is hot
Class is noisy at the front
Ensure final exam can be completed in 3 hours
Too many slides/details on slides
Have a review session before exam
Bigger projector screen
More bonus questions
No coding for take-home midterm
Template of how problems should be approached
Template of how problems should be approached
Lecture pace is too fast

Revision as of 17:49, 11 November 2010

The following is a summary of the course evaluations held in early November. This is not the official course evaluation (multiple-choice questions); I will only get those results in March, 2011.

Here is a copy of the evaluation form you filled in. [LINK]

  • 55 evaluations were returned (class size in 99 students)
    • Thanks for the very large number of comments and your time to give me feedback
  • Average time spent of this course outside the class was 5 hours \(\pm\) 2.25 hours
    • The variation around the average was quite high: most students spend extra time on assignments that require coding.
  • 76% of the class bought/borrowed the course textbook, while 30% of the class use the course textbook at least once per week
    • Many in the class rated the book as not being useful
  • Extra required for the midterm was on average 25 minutes \(\pm\) 17 minutes (1 standard deviation)
    • This large range of variation is expected; many students felt the time was adequate; but also many students felt they need over 45 minutes extra. I will use this to help set the final exam.


  • 48% of the class wanted to use Python, but the actual rate of Python usage is about 18% of the class.
    • Most students stated their preference for MATLAB was because they had already learned it; but many stated they would switch to Python if they got extra grades for that. Remember though: the main reason for this course is to learn how to use whatever tool effectively, whether it is MATLAB or Python or Polymath, or whatever your preference is.

How can the course be improved

This was the part of the evaluation I was most interested in. Below is a bullet point list of comments, with the most frequent comments at the top

Be available for help (e.g. in the lab)
As stated, I don't have an office on campus; please come see me 30 minutes before and after the class (i.e. I am available 3 hours per week as my office hours). The TA's available in the labs, or anytime outside the lab, by phoning/emailing them. The 2 TA's have taken graduate-level courses in numerical methods and are totally qualified to help you out.
Give more software tutorials; teach the basics of programming; more explanation about MATLAB and Python; more coding examples
More TAs at the tutorials
Both TAs are available at the tutorials; there was one occasion where a TA was away at a conference, but both are always available outside of class. Just call them at x22008, or make an appointment by email.
More warning about assignments
All assignment, tutorial, midterm and exam dates are now posted on the course calendar. Thanks for bringing this to my attention.
Ensure final exam can be completed in 3 hours; more time for tests and exams
This was the purpose of asking how much extra time was required for the midterm; I will use this as a guide when setting the final exam.
Less assumed prior (engineering) knowledge in the questions
The classroom and time slot
the class is hot, the blackboard is not visible from the back; the projector is too small; the late schedule (17:30 to 18:20)
I agree - but there is nothing I can do to change the allocated venue and hours. Please address these concerns directly to the university (i.e. someone in Chemical Engineering)
Class members are noisy - making it difficult to hear
I'll be as diplomatic as I can: this annoys me as well, and I do my best to make the lecture engaging. If people talk during class, please ask them to be quiet, as I don't have time to break the lecture pace for this issue.
Lecture pace is too fast
There were a variety of evaluations: some said the pace was too fast, most said it was OK, some said too slow. I know we cover a lot of material in this class, but if I go any slower we will not complete the required material for this course. So far we are right on target with completing material in December.
Have a review session before exam
That is planned: it will be on 6 December 2010.
Assignments on bottom-left of web page are easy to miss
Please scroll down the page to see all tutorials, assignments and midterms.
No coding for take-home midterm
I'm sorry - that is the purpose of the take-home midterm; there will be no code interpretation/writing in the final exam though: that will be hand-calculations and interpretation.
More bonus questions
There have been several bonus questions in the tutorials and assignments; there will also be bonus grades in the take-home midterm, and perhaps in the final (I haven't set it yet).
Too many slides (pages) / details on slides
The slides are definitely comprehensive. The vast majority of the class only had good things to say about the slides. You are aware that you can print the slides out using a 2x3 layout, fitting up to 6 slides per page?
2 weeks for assignments and tutorials; fewer assignments and tutorials; no overlapping tutorials and assignments
A 2 week turn around would be too long for this course; the material in this course is cumulative. If you've noticed we learned about polynomial interpolation, and then used it right away for numerical differentiation a week later. If we take 2 weeks to hand in an assignment you won't be able to really learn the material in time for the next sections of this course.
You have to be practicing this material all the time in assignments and tutorials. People learn by doing - very little learning actually takes place when I teach - because you are just listening. That is why tutorials and assignments are so frequent. I do this in all my courses and I will keep doing this.

More in depth examples and descriptions More examples to each concept Examples related to assignments More example on board Test or exam level questions in class Make assignments less difficult Template of how problems should be approached