Difference between revisions of "Design and analysis of experiments (2014)"
Kevin Dunn (talk | contribs) |
Kevin Dunn (talk | contribs) |
||
Line 75: | Line 75: | ||
| [http://learnche.mcmaster.ca/media/2014-4C3-6C3-Class-07C.mp3 Audio] (40 M) | | [http://learnche.mcmaster.ca/media/2014-4C3-6C3-Class-07C.mp3 Audio] (40 M) | ||
| None | | None | ||
| rowspan=" | | rowspan="12"|[http://learnche.mcmaster.ca/pid/?source=DOE Chapter 5] | ||
| rowspan=" | | rowspan="12"|[[Image:Nuvola_mimetypes_pdf.png|20px|link=Media:2014-4C3-6C3-Design-and-analysis-of-Experiments.pdf]] [[Media:2014-4C3-6C3-Design-and-analysis-of-Experiments.pdf|Slides for class]] | ||
|- | |- | ||
| 03 March | | 03 March | ||
Line 134: | Line 134: | ||
| [http://learnche.mcmaster.ca/media/2014-4C3-6C3-Class-11B.mp4 Video] (245 M) | | [http://learnche.mcmaster.ca/media/2014-4C3-6C3-Class-11B.mp4 Video] (245 M) | ||
| [http://learnche.mcmaster.ca/media/2014-4C3-6C3-Class-11B.mp3 Audio] (42 M) | | [http://learnche.mcmaster.ca/media/2014-4C3-6C3-Class-11B.mp3 Audio] (42 M) | ||
| See the source code below. | | rowspan="2"|See the source code below. | ||
|- | |- | ||
| 27 March | | 27 March | ||
Line 140: | Line 140: | ||
| <!-- [http://learnche.mcmaster.ca/media/2014-4C3-6C3-Class-11C.mp4 Video] (M) --> | | <!-- [http://learnche.mcmaster.ca/media/2014-4C3-6C3-Class-11C.mp4 Video] (M) --> | ||
| <!-- [http://learnche.mcmaster.ca/media/2014-4C3-6C3-Class-11C.mp3 Audio] (M) --> | | <!-- [http://learnche.mcmaster.ca/media/2014-4C3-6C3-Class-11C.mp3 Audio] (M) --> | ||
|} | |} | ||
Revision as of 15:39, 27 March 2014
Class date(s): | 27 February to 27 March 2014 | ||||
![]() |
Course slides | ||||
| |||||
| |||||
| |||||
| |||||
| |||||
| |||||
| |||||
| |||||
| |||||
| |||||
| |||||
Course notes and slides
- Course textbook (print chapter 5)
Slides for class
Date | Class number | Video and audio files | Other materials | Reading (PID) | Slides | |
---|---|---|---|---|---|---|
27 February | 07C | Video (227 M) | Audio (40 M) | None | Chapter 5 | ![]() |
03 March | 08A | Video (299 M) | Audio (40 M) | None | ||
05 March | 08B | Video (296 M) | Audio (42 M) | None | ||
06 March | 08C | Video (286 M) | Audio (42 M) | See the code and derivations below | ||
10 March | 09A | Video (311 M) | Audio (42 M) | |||
13 March | 09B | Video (296 M) | Audio (42 M) | |||
17 March | 10A | Video (280 M) | Audio (42 M) | See the source code below. | ||
19 March | 10B | Video (305 M) | Audio (42 M) | None | ||
20 March | 10C | Video (301 M) | Audio (42 M) | None | ||
24 March | 11A | Video (309 M) | Audio (42 M) | None | ||
26 March | 11B | Video (245 M) | Audio (42 M) | See the source code below. | ||
27 March | 11C |
Software source code
Class 08C, 06 March
Source code to estimate the DOE model
T <- c(-1, +1, -1, +1) # centered and scaled temperature
S <- c(-1, -1, +1, +1) # centered and scaled substrate concentration
y <- c(69, 60, 64, 53) # conversion is the response, y
mod <- lm(y ~ T + S + T * S)
summary(mod)
Call:
lm(formula = y ~ T + S + T * S)
Residuals:
ALL 4 residuals are 0: no residual degrees of freedom!
Coefficients:
Estimate Std. Error t value Pr(>|t|)
(Intercept) 61.5 NA NA NA
T -5.0 NA NA NA
S -3.0 NA NA NA
T:S -0.5 NA NA NA
Residual standard error: NaN on 0 degrees of freedom
Multiple R-squared: 1, Adjusted R-squared: NaN
F-statistic: NaN on 3 and 0 DF, p-value: NA
Class 08C, 06 March
3-factor example <rst> <rst-options: 'toc' = False/> The data are from a plastics molding factory which must treat its waste before discharge. The :math:`y` variable represents the average amount of pollutant discharged [lb per day], while the 3 factors that were varied were:
- :math:`C`: the chemical compound added [A or B]
- :math:`T`: the treatment temperature [72°F or 100°F] - :math:`S`: the stirring speed [200 rpm or 400 rpm] - :math:`y`: the amount of pollutant discharged [lb per day]
.. tabularcolumns:: |l|l||c|c|c||c|
+-----------+-------+---------------+-----------------+-----------------+-----------------+ | Experiment| Order | :math:`C` | :math:`T` [°F] | :math:`S` [rpm] | :math:`y` [lb] | +===========+=======+===============+=================+=================+=================+ | 1 | 5 | A | 72 | 200 | 5 | +-----------+-------+---------------+-----------------+-----------------+-----------------+ | 2 | 6 | B | 72 | 200 | 30 | +-----------+-------+---------------+-----------------+-----------------+-----------------+ | 3 | 1 | A | 100 | 200 | 6 | +-----------+-------+---------------+-----------------+-----------------+-----------------+ | 4 | 4 | B | 100 | 200 | 33 | +-----------+-------+---------------+-----------------+-----------------+-----------------+ | 5 | 2 | A | 72 | 400 | 4 | +-----------+-------+---------------+-----------------+-----------------+-----------------+ | 6 | 7 | B | 72 | 400 | 3 | +-----------+-------+---------------+-----------------+-----------------+-----------------+ | 7 | 3 | A | 100 | 400 | 5 | +-----------+-------+---------------+-----------------+-----------------+-----------------+ | 8 | 8 | B | 100 | 400 | 4 | +-----------+-------+---------------+-----------------+-----------------+-----------------+
We showed the cube plot for this system in the class on 10 March. From the cube plot we could already see the main factors, and even the **CS** interaction was noticeable.
- **C effect**: There are 4 estimates of :math:`C = \displaystyle \frac{(+25) + (+27) + (-1) + (-1)}{4} = \frac{50}{4} = \bf{12.5}`
- **T effect**: There are 4 estimates of :math:`T = \displaystyle \frac{(+1) + (+3) + (+1) + (+1)}{4} = \frac{6}{4} = \bf{1.5}`
- **S effect**: There are 4 estimates of :math:`S = \displaystyle \frac{(-27) + (-1) + (-29) + (-1)}{4} = \frac{-58}{4} = \bf{-14.5}`
- **CT interaction**: There are 2 estimates of :math:`CT`. Recall that interactions are calculated as the half difference going from high to low. Consider the change in :math:`C` when
- :math:`T_\text{high}` (at :math:`S` high) = 4 - 5 = -1 - :math:`T_\text{low}` (at :math:`S` high) = 3 - 4 = -1 - First estimate = [(-1) - (-1)]/2 = 0 - :math:`T_\text{high}` (at :math:`S` low) = 33 - 6 = +27 - :math:`T_\text{low}` (at :math:`S` low) = 30 - 5 = +25 - Second estimate = [(+27) - (+25)]/2 = +1
- Average **CT** interaction = (0 + 1)/2 = **0.5** - You can interchange :math:`C` and :math:`T` and still get the same result.
- **CS interaction**: There are 2 estimates of :math:`CS`. Consider the change in :math:`C` when
- :math:`S_\text{high}` (at :math:`T` high) = 4 - 5 = -1 - :math:`S_\text{low}` (at :math:`T` high) = 33 - 6 = +27 - First estimate = [(-1) - (+27)]/2 = -14 - :math:`S_\text{high}` (at :math:`T` low) = 3 - 4 = -1 - :math:`S_\text{low}` (at :math:`T` low) = 30 - 5 = +25 - Second estimate = [(-1) - (+25)]/2 = -13
- Average **CS** interaction = (-13 - 14)/2 = **-13.5** - You can interchange :math:`C` and :math:`S` and still get the same result.
- **ST interaction**: There are 2 estimates of :math:`ST`: (-1 + 0)/2 = **-0.5**, calculate in the same way as above.
- **CTS interaction**: There is only a single estimate of :math:`CTS`:
- :math:`CT` effect at high :math:`S` = 0 - :math:`CT` effect at low :math:`S` = +1 - :math:`CTS` interaction = [(0) - (+1)] / 2 = **-0.5**
- You can calculate this also by considering the :math:`CS` effect at the two levels of :math:`T` - Or, you can calculate this by considering the :math:`ST` effect at the two levels of :math:`C`. - All 3 approaches give the same result.
Next, use computer software to verify that
.. math::
y = 11.25 + 6.25x_C + 0.75x_T -7.25x_S + 0.25 x_C x_T -6.75 x_C x_S -0.25 x_T x_S - 0.25 x_C x_T x_S
The :math:`\mathbf{X}` matrix and :math:`\mathbf{y}` vector used to calculate the least squares model:
.. math::
\begin{bmatrix} 5\\30\\6\\33\\4\\3\\5\\4 \end{bmatrix} &= \begin{bmatrix} +1 & -1 & -1 & -1 & +1 & +1 & +1 & -1\\ +1 & +1 & -1 & -1 & -1 & -1 & +1 & +1\\ +1 & -1 & +1 & -1 & -1 & +1 & -1 & +1\\ +1 & +1 & +1 & -1 & +1 & -1 & -1 & -1\\ +1 & -1 & -1 & +1 & +1 & -1 & -1 & +1\\ +1 & +1 & -1 & +1 & -1 & +1 & -1 & -1\\ +1 & -1 & +1 & +1 & -1 & -1 & +1 & -1\\ +1 & +1 & +1 & +1 & +1 & +1 & +1 & +1\\ \end{bmatrix} \begin{bmatrix} b_0 \\ b_C \\ b_T \\ b_{S} \\ b_{CT} \\ b_{CS} \\ b_{TS} \\ b_{CTS} \end{bmatrix} \\ \mathbf{y} &= \mathbf{X} \mathbf{b} </rst>
Class 08C, 06 March
# Create the design matrix in a quick way in R
C <- T <- S <- c(-1, +1)
design <- expand.grid(C=C, T=T, S=S)
design
C T S
1 -1 -1 -1
2 1 -1 -1
3 -1 1 -1
4 1 1 -1
5 -1 -1 1
6 1 -1 1
7 -1 1 1
8 1 1 1
C <- design$C
T <- design$T
S <- design$S
y <- c(5, 30, 6, 33, 4, 3, 5, 4)
# Full factorial model (you could make errors typing this in)
mod.full <- lm(y ~ C + T + S + C*T + C*S + S*T + C*T*S)
# This powerful notation will expand all terms up to the 3rd order interactions
mod.full <- lm( y ~ (C + T + S)^3 )
summary(mod.full)
Call:
lm(formula = y ~ C + T + S + C * T + C * S + S * T + C * T * S)
Residuals:
ALL 8 residuals are 0: no residual degrees of freedom!
Coefficients:
Estimate Std. Error t value Pr(>|t|)
(Intercept) 11.25 NA NA NA
C 6.25 NA NA NA
T 0.75 NA NA NA
S -7.25 NA NA NA
C:T 0.25 NA NA NA
C:S -6.75 NA NA NA
T:S -0.25 NA NA NA
C:T:S -0.25 NA NA NA
# Guide to estimating significant coefficients, ignoring the intercept (1st coefficient)
coeff.full <- coef(mod.full)[2:length(coef(mod.full))]
# Pareto plot of the absolute coefficients
library(lattice)
coeff <- sort(abs(coeff.full), index.return=TRUE)
barchart(coeff$x,
xlim=c(0, max(abs(coeff.full))+0.1),
xlab=list("Magnitude of effect", cex=1.5),
ylab = list("Effect", cex=1.5),
groups=(coeff.full>0)[coeff$ix], col=c("lightblue", "orange"),
scales=list(cex=1.5)
)
# Eliminate some factors: use the regular linear model notation
# Eliminate C*T*S, C*T and S*T
mod.sub <- lm(y ~ C + T + S + C*S)
summary(mod.sub)
confint(mod.sub)
coeff.sub <- coef(mod.sub)[2:length(coef(mod.sub))]
coeff <- sort(abs(coeff.sub), index.return=TRUE)
barchart(coeff$x,
xlim=c(0, max(abs(coeff.sub))+0.1),
xlab=list("Magnitude of effect", cex=1.5),
ylab = list("Effect", cex=1.5),
groups=(coeff.sub>0)[coeff$ix], col=c("lightblue", "orange"),
scales=list(cex=1.5)
)
Class 11B and 11C, 26 and 27 March
To find all the 2-factor and 3-factor coefficients in a linear model
terms.formula( y ~ (A+B+C+D)^2 )
terms.formula( y ~ (A+B+C+D)^3 )
Class 11B, 26 March
Code for contour plots in response surface methods
R | MATLAB |
---|---|
# Initial set of 4 runs
T <- c(-1, +1, -1, +1, 0)
S <- c(-1, -1, +1, +1, 0)
y <- c(193, 310, 468, 571, 407)
# Visualize the surface
# ------------------------------------------------------
mod <- lm(y ~ T + S + T*S)
summary(mod)
N <- 50 # resolution of surface
# (higher values give smoother plots)
# The lower and upper bounds, in coded units,
# over which we want
# to visualize the surface
bound <- 3
T_plot <- seq(-bound, bound ,length=N)
S_plot <- seq(-bound, bound, length=N)
grd <- expand.grid(T=T_plot, S=S_plot)
# Predict directly from least squares model
grd$y <- predict(mod, grd)
library(lattice)
contourplot(y ~ T * S,
data = grd,
cuts = 10,
region = TRUE,
col.regions = terrain.colors,
xlab = "Temperature",
ylab = "Substrate",
main = "Predicted response"
)
trellis.focus("panel", 1, 1, highlight=FALSE)
lpoints(T, S, pch="O", col="red", cex=3)
llines(c(-1, +1, +1, -1, -1), c(-1, -1, +1, +1, -1),
col="red", lwd=3)
lpoints(1, 2.44, col="red", cex=5, pch="*")
ltext(0.4, 2.44, "Expt 5", cex=2, col="red")
lpoints(2, 4.88, col="red", cex=5, pch="*")
ltext(1.2, 4.88, "Expt 6", cex=2, col="red")
trellis.unfocus()
|
X = [+1 +1 +1 +1 +1; ...
-1 +1 -1 +1 0; ...
-1 -1 +1 +1 0; ...
+1 -1 -1 +1 0]';
% Profit values recorded from the factorial experiments
profit = [193 310 468 571 407]';
% Coefficient order = [Intercept, b_T, b_S, b_{TS}]
b = inv(X'*X)*X'*profit
% What does the model surface look like?
[T, S] = meshgrid(-2:0.1:2, -2:0.1:2);
Y = b(1) + b(2).*T + b(3).*S + b(4).*T.*S;
subplot(1, 2, 1)
surf(T, S, Y)
xlabel('T')
ylabel('S')
grid('on')
subplot(1, 2, 2)
contour(T, S, Y)
xlabel('T')
ylabel('S')
grid('on')
axis equal
colorbar
|