Practice questions

The questions below are from previous McMaster University exams when the course was taught by Dr. John MacGregor and other instructors. We have covered much of the same material - but a few topics were not covered - so don't expect to be able to answer all questions.

<rst> <rst-options: 'toc' = False/> <rst-options: 'reset-figures' = False/>

.. |-| replace:: :math:`-` .. |+| replace:: :math:`+` .. |micron| replace:: :math:`$\mu $m`

.. question::

#. Calculate the minimum area and diameter of a circular thickener to treat 720 :math:`\text{m}^3` per hour of slurry containing 20 |micron| particles of silica, whose density is about 2600 :math:`\text{kg.m}^{-3}`. The particles are suspended in water at a concentration of 650 :math:`\text{kg.m}^{-3}`. The slurry cannot be tested in a lab. Use an over-design factor of 1.5 on the settling velocity. #. If it is desired to have an underflow of 1560 kg solids per :math:`\text{m}^{3}` underflow; what is the underflow volumetric flow rate if total separation of solids occurs? #. Calculate the separation factor.

</rst>