Difference between revisions of "Assignment 5 - 2014"

From Separation Processes: 4M3
Jump to navigation Jump to search
 
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
{{OtherSidebar
{{OtherSidebar
| due_dates = 03 December 2014 [no late hand-ins or late day credits can be used for this one]
| due_dates = 03 December 2014 [''no late hand-ins or late day credits can be used for this one'' - solutions will be posted on the 3rd]
| dates_alt_text = Due date(s)
| dates_alt_text = Due date(s)
| questions_PDF = 2014-4M3-Assignment-5.pdf
| questions_PDF = 2014-4M3-Assignment-5.pdf
| questions_text_alt = Assignment questions
| questions_text_alt = Assignment questions
| questions_link =  
| questions_link =  
| solutions_PDF =  
| solutions_PDF = 2014-4M3-Assignment-5-Solutions.pdf
| solutions_text_alt = Solutions  
| solutions_text_alt = Solutions  
| solutions_link =  
| solutions_link =  
Line 78: Line 78:
#. What is the overall acetone recovery from such a 2-stage cross-current system? **[3]**
#. What is the overall acetone recovery from such a 2-stage cross-current system? **[3]**
#. Now use a clean copy of the drawing (i.e. you assignment submission should have two ternary diagrams). In this second diagram start the construction for the counter-current system. The objective is to achieve the same (or better) raffinate concentration in terms of acetone as the cross-current system.
#. Now use a clean copy of the drawing (i.e. your assignment submission should have two ternary diagrams). In this second diagram start the construction for the counter-current system. The objective is to achieve the same (or better) raffinate concentration in terms of acetone as the cross-current system, but using :math:`40\,\text{kg.hr}^{-1}` of pure solvent.
With a few basic lines on the drawing you should be able to find the values for these cross-current system:
With a few basic lines on the drawing you should be able to find the values for these cross-current system:

Latest revision as of 02:34, 4 December 2014

Due date(s): 03 December 2014 [no late hand-ins or late day credits can be used for this one - solutions will be posted on the 3rd]
Nuvola mimetypes pdf.png (PDF) Assignment questions
Nuvola mimetypes pdf.png (PDF) Solutions

<rst> <rst-options: 'toc' = False/> <rst-options: 'reset-figures' = False/>

Assignment objectives

=========
    • Objectives**: We have been doing non-stop examples and problems in class. This assignment gives you a chance now to try some more problems related to liquid-liquid extraction, adsorption and drying; without my help and guidance.

All these questions are from prior exams and tests.

.. question::

The isotherm for benzene, at 25°C, on an activated carbon adsorbent is given as:

.. math::

C_\text{A,S} = 32 C_\text{A}^{0.428}

where :math:`C_\text{A,S}` is in units of mg benzene per gram of carbon, and :math:`C_\text{A}` is in units of mg benzene per litre of water-based solution.

You want to create your own adsorber packed bed from a piece of piping that has diameter of 24.5 cm.

The activated carbon supplier has given you the following specification sheet (and the isotherm information above):

* activated carbon mean diameter = 2 mm * activated carbon size distribution range 0.4 mm to 3.8 mm * activated carbon bulk density = 410 g/L * activated carbon particle density = 520 g/L * cost of activated carbon is $5.50 per kilogram.

You would like a breakthrough time of 4 hours when treating a feed stream containing 2.8 g of benzene per litre. You have to treat 30 L per minute of waste water.

#. What type of adsorption isotherm is this? **[1]**

#. How long should your packed bed be? Be clear with any simplifying assumptions you make. **[14]**

Use the rule of thumb that if you cannot perform a lab experiment to calculate the MTZ, that your MTZ is 4ft, and assuming a symmetric wavefront, that the :math:`\text{LUB} = 2 \times \text{MTZ}`.

#. What will be the cost of the adsorbent you need to purchase? **[3]**


.. question::

.. inspired from example 18.7, Seader, Henly and Roper, p 753.

A filter cake from a plate-and-frame press is to be dried by circulating warm, dry air over the solids. See `this photo <http://www.flickr.com/photos/cdeimages/6322211031>`_ for a visual idea of what the material looks like. Trays are loaded with the solid, which is 3 cm high and an area of 2.0 :math:`\text{m}^2` per tray. Each tray contains 80 kg of wet filter cake, and the filtration press step leaves the solids with approximately 30 wt% moisture on a dry basis.

Air at 1 atmosphere, 70°C, and a relative humidity of 10% is used, at an approximate velocity of :math:`4.2 \text{m.s}^{-1}`, in a direction that flows parallel to the solids.

#. Estimate the mass of water that would be evaporated from the cake after 4 hours. Be clear on all assumptions you make as you proceed. **[12]**

#. What is the moisture content of the cake after 4 hours, expressed on a dry basis? **[2]**

#. Name one method we can implement to reduce the drying time. **[1]**

.. question::

:math:`140\,\text{kg.hr}^{-1}` of a 40% acetone-in-water mixture are to be separated using trichloroethane as solvent.

#. Draw a flow diagram that illustrates the cross-current streams, having only 2 cross-current stages.

#. Draw a general flow diagram that illustrates the counter-current system, with two stages on one end, and two stages on the other end, and a general "Nth" stage in the middle.

#. If :math:`80\,\text{kg.hr}^{-1}` of pure solvent is fed into the first cross-current stage and :math:`60\,\text{kg.hr}^{-1}` into the second cross-current stage, what will be the acetone purity leaving in the raffinate from stage 1 and stage 2? Show all constructions and calculations on the ternary diagram (download the PDF to get a copy of this diagram). Make sure all lines are clearly visible. *Hint*: you should achieve an acetone concentration in the raffinate of about 11%. **[8]**

#. What is the overall acetone recovery from such a 2-stage cross-current system? **[3]**

#. Now use a clean copy of the drawing (i.e. your assignment submission should have two ternary diagrams). In this second diagram start the construction for the counter-current system. The objective is to achieve the same (or better) raffinate concentration in terms of acetone as the cross-current system, but using :math:`40\,\text{kg.hr}^{-1}` of pure solvent.

With a few basic lines on the drawing you should be able to find the values for these cross-current system:

a) the expected raffinate flow rate; b) the expected extract flow rate; c) the expected extract composition.

#. Now locate the operating point, :math:`P`, and use this to calculate the number of stages required. Submit your ternary diagram showing these calculations.

#. Assume that the last stage is at the point you selected in part 5 of this problem (i.e. that it was at that desired 11% level for acetone). Calculate the recovery of acetone for the counter-current system.

#. Now compare **and contrast** the following parameters for the two configurations:

* the extract concentration (for the cross-current system this is the blended concentrations of :math:`E_1` and :math:`E_2`) * the extract flow rate * the recovery * the solvent use compared * *for extra credit*: the capital and operating costs compared between the two systems.

.. question::

A fourth practice question for the exams (no credit for the assignment) appears in the PDF download for this assignment.

</rst>